Two new high-performance load sensor products from Strainsert Inc., based on license-free, 2.4GHz
telemetry with a working range up to 800 metres, will facilitate straightforward and cost-effective installation
for single- or multi-sensor use over long distances, problematic installations and otherwise challenging load
measurement tasks. Especially compelling as an alternative for system set-ups where long and noise-prone
cable runs in traditional wired systems prove complex and expensive, the new wireless load sensors and
load cell telemetry systems are available in the UK from Ixthus Instrumentation, Strainsert’s exclusive UK
distribution partner. The new products include wireless load pins with integrated wireless transmitters,
configured as standard or custom designed clevis pins or shackle bolts for single or multiple sensor systems.
Complementary to these wireless-integrated sensors, the newly available T24 series wireless load cell
telemetry system comprises modular transmitters, base stations and accessories with the adaptability for
conversion of existing wired Strainsert sensors with strain, current or voltage output – or for the development
of completely new wireless system designs. With IP67 rated enclosures and built for the harshest conditions
for weighing and load monitoring tasks in aerospace, industrial, construction, mobile machinery and more,
the range is supported with comprehensive software tools for straightforward configuration and monitoring.
Image: Strainsert’s new T24 wireless load cell telemetry system
Strainsert’s T24 wireless transmitter modules are available in two module sizes with a choice of
batteries – a compact AA cell version or for longer battery life a larger sized D cell module. The
electrical and range performance specifications for both modules are similar. The 4-wire bridge
measurement and 4.5 to 5.25 VDC excitation characteristics suit Strainsert sensor requirements.
The modular system offers a choice of four USB powered base stations that are used for
interfacing with PCs or PLCs through a choice of USB, RS232 or RS485 ports for configuration
and control. They work in concert with the T24 transmitter modules, facilitating the data capture
through the T24 software toolkit which is included with the wireless systems. Further system
accessories include Modbus Gateway and ASCII serial interfaces, analogue and relay output
1/2
modules and wireless range extenders for up to 1600 metres. Also included are wireless handheld
receivers and LED display modules.
Image: Strainsert’s wireless load pin and shackle bolt
The Strainsert wireless load pin has all the specification characteristics and interfacing possibilities
offered by the T24 telemetry systems with the potential advantage found in its integrated load
sensor component and transmitter design that can further aid installation planning and
commissioning.
Ixthus represents global sensor technology leaders like Strainsert Inc. for force, torque and
vibration measurement. Its knowledgeable technical staff are on hand to assist with measurement
solutions, providing a complete sales and support service at component level or for complete
instrumentation systems. For further information please call +44 (0) 1327 353437, email
info@ixthus.co.uk or visit www.ixthus.co.uk.
Über Ixthus Instrumentation Limited

Two new high-performance load sensor products from Strainsert Inc., based on license-free, 2.4GHz telemetry with a working range up to 800 metres, will facilitate straightforward and cost-effective installation for single- or multi-sensor use over long distances, problematic installations and otherwise challenging load measurement tasks. Especially compelling as an alternative for system set-ups where long and noise-prone cable runs in traditional wired systems prove complex and expensive, the new wireless load sensors and load cell telemetry systems are available in the UK from Ixthus Instrumentation, Strainsert’s exclusive UK distribution partner. The new products include wireless load pins with integrated wireless transmitters, configured as standard or custom designed clevis pins or shackle bolts for single or multiple sensor systems.

Complementary to these wireless-integrated sensors, the newly available T24 series wireless load cell telemetry system comprises modular transmitters, base stations and accessories with the adaptability for conversion of existing wired Strainsert sensors with strain, current or voltage output – or for the development of completely new wireless system designs. With IP67 rated enclosures and built for the harshest conditions for weighing and load monitoring tasks in aerospace, industrial, construction, mobile machinery and more, the range is supported with comprehensive software tools for straightforward configuration and monitoring.

Strainsert’s T24 wireless transmitter modules are available in two module sizes with a choice of batteries – a compact AA cell version or for longer battery life a larger sized D cell module. The electrical and range performance specifications for both modules are similar. The 4-wire bridge measurement and 4.5 to 5.25 VDC excitation characteristics suit Strainsert sensor requirements.

The modular system offers a choice of four USB powered base stations that are used for interfacing with PCs or PLCs through a choice of USB, RS232 or RS485 ports for configuration and control. They work in concert with the T24 transmitter modules, facilitating the data capture through the T24 software toolkit which is included with the wireless systems. Further system accessories include Modbus Gateway and ASCII serial interfaces, analogue and relay output modules and wireless range extenders for up to 1600 metres. Also included are wireless handheld receivers and LED display modules.

The Strainsert wireless load pin has all the specification characteristics and interfacing possibilities offered by the T24 telemetry systems with the potential advantage found in its integrated load sensor component and transmitter design that can further aid installation planning and commissioning.

Ixthus represents global sensor technology leaders like Strainsert Inc. for force, torque and vibration measurement. Its knowledgeable technical staff are on hand to assist with measurement solutions, providing a complete sales and support service at component level or for complete instrumentation systems. For further information please call +44 (0) 1327 353437, email info@ixthus.co.uk or visit www.ixthus.co.uk.

Firmenkontakt und Herausgeber der Meldung:

Ixthus Instrumentation Limited
The Stables, Williams‘ Barn, Tiffield Road
NN12 6HP Towcester Northamptonshire
Telefon: +44 (1327) 353437
Telefax: +44 (1327) 353564
http://www.ixthus.co.uk

Ansprechpartner:
Graham Pattison
Ixthus Instrumentation Limited
Telefon: +44 (1327) 353437
E-Mail: graham.pattison@ixthus.co.uk
Eddie Palmer
MEPAX
Telefon: +44 (7748) 815-825
E-Mail: e.palmer@mepax.com
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.

counterpixel